We manufacture spiral and curved bevel gears in almost all possible desired qualities and versions:
from the contract processing up to assembly-ready system components
from precision wheel sets up to highly stressable clutch teeth
from batch sizes of 1 to a few hundred
For demanding applications (as well as the load capacity analysis) the flank geometry is of essential importance as well as noise and temperature behaviour. We would be glad to support and accompany you in the calculation and design stages, as well as the analysis of possible types of construction or assembly. Our specialists are ready to support you using the powerful software packages KISSOFT® and KIMOS®.
Klingelnberg Cyclo-Palloid
Klingelnberg HPG
Curvex
Klingelnberg
ground
Gleason
ground
5-Axis hard milled
Straight Tooth
|
|
|
|
|
|
|
|
|---|
Mean module | 1-20 | 4-20 | 1-10 | 1-12 | 4-12 | 1-frei | 4-frei |
Pressure Angle | 20° (17,5°) | 20° | 20° | 20° | 20° | beliebig | ---- |
Number of Tooth | 6-120 | 6-120 | 6-120 | 6-120 | 6-120 | 6-frei | 6-frei |
Outer-ø | <1400mm | <1400mm | <650mm | <900mm | <900mm | <3000mm | <3000mm |
Shaft-Length | <1800mm | <1800mm | <900mm | <900mm | <900mm | <2000mm | <2000mm |
Axis Angle | 45-135° | 45-135° | 45-135° | 45-135° | 45-135° | 3-160° | 3-160° |
Tooth Width | <180mm | <180mm | <100mm | <150mm | <150mm | frei | frei |
Quality DIN3965 | 7-9 | 5-6 | 7-9 | 4-5 | 4-5 | 5-6 | 5-6 |
Materials | Nitriding and tempering steels, castings, plastics, stainless Steels |
Heat Treatment | Case hardening, nitriding, induction hardening, tempering, browning |
Options | Splines internal and external acc DIN ISO 14 or DIN5480, polygons, spur gear teeth, Hirth splines, Coating (e.g. Balinit) balancing according to DIN ISO 1950 G1,6. |