When the bevel gear is processed and manufactured, it is very important to do a good job of the key points, and the key points can be solved to ensure its excellent characteristics. Some small key points must be paid attention to in the manufacture of bevel gears.

Gear processing is based on tooth processing. However, in addition to gear processing, there are other methods for making transmission gears. Depending on the raw material, their methods are also different. The key to the quenching and tempering treatment of the transmission gear is carried out after the tooth is processed. Perhaps, before the bevel gear is processed, the normalizing treatment to remove the internal working pressure of the transmission gear blank is another way to say. The teeth of the transmission gear must have the necessary compressive strength to transmit a large force, and the key is strength and ductility.

In order to exceed the regulations, raw materials can be selected according to its application purpose. In order to prevent the damage of the gear, the surface layer can be hardened to solve the problem. In another production process, the surface layer processing work of bevel gear processing is indispensable. Put high-carbon steel and carbon steel parts into the nitrided material and maintain the temperature around the yield limit. The carbon element It penetrates from the surface of the component. When it is heat-treated, only part of the nitriding is hardened, and the bevel gear can adjust the thickness of the hard underlayer according to the length of the nitriding time.

Therefore, when developing bevel gear processing, this key point cannot be ignored, and everyone's manufacturing requirements should be considered.