Oil cap and breather are mainly used for dischargeTurbine shaftThe gas in the reducer case; the end cover is divided into a large end cover and a small end cover. The end cover is used to fix the axial position of the shafting components and accept the axial load. The bearing cover is used to close the oil seal at both ends of the bearing seat hole; The internal lubricating oil leaks to improve the use time of the lubricating oil; the oil drain plug is mainly used to drain the dirty oil and cleaning when replacing the lubricating oil; the oil standard cap and the oil standard are mainly used to investigate the inside of the turbine gear reducer case Whether the amount of oil is qualified;

The basic structure of the worm gear reducer is mainly composed of the transmission parts worm gear, shaft, bearing, box and its accessories. It can be divided into three basic structural parts: box body, worm gear, bearing and shaft combination. The box body is the base of all the accessories in the worm gear reducer. It is an important accessory that supports the fixed shaft system components, ensures the correct relative orientation of the transmission accessories and supports the load acting on the reducer. The primary role of the worm gear is to transmit the motion and power between the two interwoven shafts, and the primary role of the bearing and the shaft is to transmit power, work and improve efficiency.